Pre-Roll Machines

Our products are custom designed. We work directly with processors in the cannabis industry to create equipment that solve their processing issues.

​

Roll Model 300 - Pre Roll Filling Machine        

Testimonials

           "We did a great deal of research before choosing the Reefined Processing 300 unit, and it was the best decision we ever made. Our prerolls come out a perfect 1.51-1.53g every time, and the loading time is incredibly fast. I've seen other units that cost 5x the price and they load and unload slower. We can crank out over 5000 prerolls a day with a few workers thanks to Alex and the gang. I'd recommend their products 100% and their service is amazing. Thanks for everything!!"

 

Chris

CBD Bark

New York

          "The cannabis industry has seen a lot of change over the years, especially with processing equipment. My favorite so far is the Roll Model 300 produced by Reefined Processing. If you have ever rolled a bunch of joints by hand you know this task is tedious and hard on your hands. With the Roll Model 300 we can make 300 joints very efficiently. This machine not only makes perfect joints but it saves you as a business owner valuable time. If you're looking to save time and money this machine is a must when producing joints for a volume market."

 

Geary

Evergreen Solutions

Washington State

Corner view of machine after second fill
straight front angle with cones loaded
Wide Screen Angled front view
front view of machine and cones in holding tray
Angled front view of cone tips after first fill BEST
Corner angle with cones loaded
Low angle side view and front
straight corner view of cones up BEST
straight angle with cones
low corner angle of leg and handle
Close up of handle
holes between loading and holding tape over washers
More Angled Side view front
Conrner angle w tape over washers
Front angled view of cones in holding tray
close up of full cones midplane
Angled side view of cone tips and handle after first fill
Close up angle of metering tray and front
close up of cones in holding tray
Angled front view close up of cones full with logo
Close up corner angle with tape over washers
IMG_0905
IMG_0880
IMG_0891
IMG_0898
IMG_0892

The Roll Model 300 is a high volume pre-roll packing machine. With a streamlined design, the Roll Model uses three independent surfaces to hold and pack 300 pre-rolls simultaneously. 

​​

  • Dimensions: 24" x 20" x 12"

  • Table surfaces made from Food Compliant Plastics.

  • Gives you the ability to process 300 joints in minutes.

  • One machine can be used for 0.5g, 0.75g, 1.0g, and 1.25g joints.

  • Partition plates available for processing multiple strains in the same load.

  • Partition plates available for processing loads of 50, 100, and 200 pre-rolls.

  • Precision metering of +/- 0.1g of material.

  • Compatible with most pre-rolls on the market: 84mm, 98mm, 98mm Reefer, 109mm.

  • Can be customized to work with most specialty cones. Contact Us for cone options.

  • Removable parts for easy cleaning with isopropyl alchohol.

  • Vibrating base can be used separately with your sifting processes.

  • Lower catchment table for recovering excess material.

​

​

​

Starting at $4,650

​

Contact Us for purchasing and customization information

Front angled view of cones in holding tray